IECEE CB Scheme
Your benefits
- Save time and money - by identifying compliance considerations at the earliest possible stages of the product development process.
- Minimise risks - by avoiding supply chain problems that can result in product recalls and reputational harm.
- Gain a competitive edge - by delivering products of consistent quality and safety, without compromising time to market.
- Benefit from complete solutions - by utilising our full range of testing, certification and auditing services
- Achieve global support - by leveraging TÜV SÜD’s worldwide expertise in regulations and requirements, regardless of where your products are manufactured or sold.
The management understands the importance of impartiality in our certification of products. We will use all reasonable efforts to manage all possible conflicts of interest and ensure objectivity of our certification services.
Providing an efficient pathway for global access of your products
In today’s global business environment, access to markets all over the world can be a critical factor in a product’s economic success. However, barriers to international trade are still common, and demonstrating compliance with regulatory compliance requirements in individual countries is typically a costly and time-consuming process. Unfortunately, delays in achieving market access can place your company at a significant disadvantage in a highly competitive marketplace.
The IEC System for Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) Certified Body (CB) Scheme is the world’s first international system for the mutual acceptance of product safety test reports and certificates for electrical and electronic equipment, devices and components. Based on the use of internationally-accepted product safety standards, the CB Scheme relies on a global network of CB testing laboratories (CBTLs), who are responsible for testing products to applicable technical standards. Product test results are then submitted to national certification bodies (NCBs) in CB Scheme member countries, who can authorise legal access to CBTL-tested products without additional testing.
Key steps in the CB Scheme
A manufacturer submits product samples to a CBTL for testing to product-specific IEC standards, as well as any technical deviations from IEC standards that apply in those countries identified for certification.
The CBTL conducts product testing to assess compliance with the applicable technical requirements. If the product meets all technical requirements, the CBTL issues a CB Test Report and Test Certificate to the product’s manufacturer.
The manufacturer then submits a sample of the product, along with the CB Test Report and Test Certificate, to NCBs in target countries to obtain national certification. This certification confirms that the product conforms with national technical requirements, allowing legal access to that market.
Presently, there are more than 50 CB Scheme member countries around the world, including European Union (EU) Member States, the U.S., China, India, Korea and Russia. Manufacturers using the CB Scheme can potentially gain access to every CB Scheme member country without the need for expensive, duplicate testing. Further, CB Scheme applicants are often given priority consideration by NCBs since no additional testing is required.
TÜV SÜD is an active global participant in the IECEE CB Scheme. We operate CB Scheme-authorised CBTLs that can test electrical and electronic products under nearly all of the 19 CB Scheme product categories. In addition to CB Scheme product testing, TÜV SÜD is also a recognised NCB under the CB Scheme.
Examples of our CB Scheme scope
IEC Standard | Scope |
IEC 60601 | Medical electrical equipment |
IEC 61010 | Safety requirements for electrical equipment for measurement, control and laboratory use |
IEC 61029 | Motor-operated electric tools |
IEC 60950 | Information technology equipment |
IEC 60065 | Audio, video and similar electronic apparatus |
IEC 60335 | Household appliance |
IEC 60598 | Lighting product |
IEC 60745 | Power tool |
IEC 61558 | Transformer |
TÜV SÜD’s CB Scheme testing and certification services include:
- Testing - TÜV SÜD operates CB Scheme-recognised testing laboratories around the world.
- Documentation - We can review the content of your documentation and advise of any changes necessary to ensure compliance.
- Regulations - TÜV SÜD technical experts keep up-to-date on applicable regulations, and participate in a number of key industry groups and trade organisations.
- Other requirements - We can offer support in complying with CB Scheme-required testing in conjunction with other international regulations and standards.
TÜV SÜD is a trusted partner to companies ranging from global manufacturers to regional and local research and development firms. Our team of specialists works with you through the entire product development cycle to add value and help you to deliver safe and reliable products. TÜV SÜD technical professionals are actively involved in international advisory boards and standards development activities, ensuring up-to-date knowledge of current and changing requirements.
Represented in over 800 locations worldwide, TÜV SÜD has an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The TÜV SÜD brand and our distinctive blue octagon mark are instantly recognised around the globe as symbols of quality and safety, and will increase customer confidence in your brand.
The IEC System for Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE) Certified Body (CB) Scheme is the world’s first international system for the mutual acceptance of product safety test reports and certificates for electrical and electronic equipment, devices and components. Based on the use of internationally-accepted product safety standards, the CB Scheme relies on a global network of CB testing laboratories (CBTLs), who are responsible for testing products to applicable technical standards. Product test results are then submitted to national certification bodies (NCBs) in CB Scheme member countries, who can authorise legal access to CBTL-tested products without additional testing.
Key steps in the CB Scheme
A manufacturer submits product samples to a CBTL for testing to product-specific IEC standards, as well as any technical deviations from IEC standards that apply in those countries identified for certification.
The CBTL conducts product testing to assess compliance with the applicable technical requirements. If the product meets all technical requirements, the CBTL issues a CB Test Report and Test Certificate to the product’s manufacturer.
The manufacturer then submits a sample of the product, along with the CB Test Report and Test Certificate, to NCBs in target countries to obtain national certification. This certification confirms that the product conforms with national technical requirements, allowing legal access to that market.
Presently, there are more than 50 CB Scheme member countries around the world, including European Union (EU) Member States, the U.S., China, India, Korea and Russia. Manufacturers using the CB Scheme can potentially gain access to every CB Scheme member country without the need for expensive, duplicate testing. Further, CB Scheme applicants are often given priority consideration by NCBs since no additional testing is required.
TÜV SÜD is an active global participant in the IECEE CB Scheme. We operate CB Scheme-authorised CBTLs that can test electrical and electronic products under nearly all of the 19 CB Scheme product categories. In addition to CB Scheme product testing, TÜV SÜD is also a recognised NCB under the CB Scheme.
Examples of our CB Scheme scope
IEC Standard | Scope |
IEC 60601 | Medical electrical equipment |
IEC 61010 | Safety requirements for electrical equipment for measurement, control and laboratory use |
IEC 61029 | Motor-operated electric tools |
IEC 60950 | Information technology equipment |
IEC 60065 | Audio, video and similar electronic apparatus |
IEC 60335 | Household appliance |
IEC 60598 | Lighting product |
IEC 60745 | Power tool |
IEC 61558 | Transformer |
TÜV SÜD’s CB Scheme testing and certification services include:
- Testing - TÜV SÜD operates CB Scheme-recognised testing laboratories around the world.
- Documentation - We can review the content of your documentation and advise of any changes necessary to ensure compliance.
- Regulations - TÜV SÜD technical experts keep up-to-date on applicable regulations, and participate in a number of key industry groups and trade organisations.
- Other requirements - We can offer support in complying with CB Scheme-required testing in conjunction with other international regulations and standards.
TÜV SÜD is a trusted partner to companies ranging from global manufacturers to regional and local research and development firms. Our team of specialists works with you through the entire product development cycle to add value and help you to deliver safe and reliable products. TÜV SÜD technical professionals are actively involved in international advisory boards and standards development activities, ensuring up-to-date knowledge of current and changing requirements.
Represented in over 800 locations worldwide, TÜV SÜD has an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The TÜV SÜD brand and our distinctive blue octagon mark are instantly recognised around the globe as symbols of quality and safety, and will increase customer confidence in your brand.
Power supply
IEC Standards and Scope
- IEC 61558 - Power supply units
Audio, video and similar electronic apparatus
IEC Standards and Scope
- IEC 60065 - Audio, video and similar electronic apparatus
- IEC 61965 - Mechanical safety of cathode ray tubes
Batteries
IEC Standards and Scope
- IEC 60086 - Primary batteries
- IEC 60095 - Lead-acid starter batteries
- IEC 60622 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
- IEC 60623 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
- IEC 60896 - Stationary lead-acid batteries
- IEC 61960 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
- IEC 62133 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
- IEC 62259 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
- IEC 62281 - Safety of primary and secondary lithium cells and batteries during transport
Tools
IEC Standards and Scope
- IEC 60745 - Hand-held motor-operated electric tools
- IEC 61029 - Transportable motor-operated electric tools
Lighting products
IEC Standards and Scope
- IEC 60155 - Glow-starters for fluorescent lamps
- IEC 60570 - Electrical supply track systems for luminaires
- IEC 60598 - Lighting products
- IEC 60920 - Ballasts for tubular fluorescent lamps - General and safety requirements
- IEC 60921 - Ballasts for tubular fluorescent lamps - Performance requirements
- IEC 60922 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements
- IEC 60923 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
- IEC 60926 - Auxiliaries for lamps - Starting devices (other than glow starters)
- IEC 60928 - Auxiliaries for lamps - AC supplied electronic ballasts for tubular fluorescent lamps
- IEC 60929 - AC and/or DC supplied electronic control gear for tubular fluorescent lamps - Performance requirements
- IEC 60968 - Self-ballasted lamps for general lighting services - Safety requirements
- IEC 60969 - Self-ballasted lamps for general lighting services - Performance requirements
- IEC 61046 - AC or DC supplied electronic step-down convertors for filament lamps
- IEC 61347 - Lamp control gear
- IEC 62031 - LED modules for general lighting
- IEC 62471 - Photobiological safety of lamps and lamp systems
- IEC 62560 - Self-ballasted LED lamps for general lighting services > 50 V
Information technology equipment
IEC Standards and Scope
- IEC 60950 - Information technology equipment
- IEC 62040 - Uninterruptible power systems (UPS)
Household appliances
IEC Standards and Scope
- IEC 60204 - Electrical equipment of machines
- IEC 60335 - Household electrical appliances
Measurement equipment
IEC Standards and Scope
- IEC 61010 - Electrical equipment for measurement, control and laboratory use