Brazil Market Access
Access the Brazilian market by meeting the requirements for your medical device
Brazil represents the largest market for medical devices in South America. However, manufacturers seeking to gain access to the Brazilian market face significant hurdles. The regulatory approval system for medical devices marketed or sold in Brazil is complex and dynamic, and requires product testing, INMETRO certification for certain devices, BGMP Inspections and registration at ANVISA (Agência Nacional de Vigilância Sanitária).
Before most electrical medical devices and some non electrical medical devices can be registered with ANVISA, they must successfully achieve INMETRO certification through an INMETRO accredited certification body. A factory inspection prior to INMETRO certification is also required. In order to maintain the INMETRO certification, annual factory inspections have to be carried out.
For INMETRO certification, only test reports from organisations that are either accredited by INMETRO or by members of the internationally recognised forums IAAC, EA or ILAC are accepted. An INMETRO certificate will be issued for approved devices, which will also be authorised to display the INMETRO certification mark. INMETRO certification has a validity of 5 years. A re-registration has to be performed once the INMETRO certification has expired.
All medical devices in classes III and IV (comparable to classes IIb and III in accordance with 93/42/EEC) are subjected to Brazilian GMP (BGMP) inspections carried out by ANVISA in two-year intervals. Alternatively, manufacturers can participate in the Medical Device Single Audit Programme (MDSAP). For medical device registration at ANVISA, an audit report based on MDSAP would also be accepted.
TÜV SÜD can offer you a service to demonstrate compliance for your medical devices within the Brazilian market. We are accredited by INMETRO as a Certification Body (CB) for electrical medical devices and can provide INMETRO certification including initial and annual maintenance factory inspections. Our clients can choose to have factory inspections carried out parallel with other inspections (NRTL) or audits (ISO 13485/MDD). We also offer medical device testing in compliance with INMETRO requirements.
TÜV SÜD is also authorised to perform audits within the scope of the Medical Device Single Audit (MDSAP) pilot program. Gain access to multiple markets by participating at the MDSAP that satisfies the needs of multiple regulatory authorities, including ANVISA in Brazil.
- Accepted test reports - TÜV SÜD test reports can be used in support of INMETRO certification performed by INMETRO accredited organisations.
- INMETRO certification - TÜV SÜD is an INMETRO accredited certification body and can certify your medical device based on INMETRO standards and perform the annual factory inspection required for INMETRO certification.
- Medical Device Single Audit Program (MDSAP) - TÜV SÜD is authorised to perform audits within the scope of the MDSAP pilot program. Gain access to multiple markets by participating at the MDSAP that satisfies the needs of multiple regulatory authorities, including ANVISA in Brazil.
Before most electrical medical devices and some non electrical medical devices can be registered with ANVISA, they must successfully achieve INMETRO certification through an INMETRO accredited certification body. A factory inspection prior to INMETRO certification is also required. In order to maintain the INMETRO certification, annual factory inspections have to be carried out.
For INMETRO certification, only test reports from organisations that are either accredited by INMETRO or by members of the internationally recognised forums IAAC, EA or ILAC are accepted. An INMETRO certificate will be issued for approved devices, which will also be authorised to display the INMETRO certification mark. INMETRO certification has a validity of 5 years. A re-registration has to be performed once the INMETRO certification has expired.
All medical devices in classes III and IV (comparable to classes IIb and III in accordance with 93/42/EEC) are subjected to Brazilian GMP (BGMP) inspections carried out by ANVISA in two-year intervals. Alternatively, manufacturers can participate in the Medical Device Single Audit Programme (MDSAP). For medical device registration at ANVISA, an audit report based on MDSAP would also be accepted.
TÜV SÜD can offer you a service to demonstrate compliance for your medical devices within the Brazilian market. We are accredited by INMETRO as a Certification Body (CB) for electrical medical devices and can provide INMETRO certification including initial and annual maintenance factory inspections. Our clients can choose to have factory inspections carried out parallel with other inspections (NRTL) or audits (ISO 13485/MDD). We also offer medical device testing in compliance with INMETRO requirements.
TÜV SÜD is also authorised to perform audits within the scope of the Medical Device Single Audit (MDSAP) pilot program. Gain access to multiple markets by participating at the MDSAP that satisfies the needs of multiple regulatory authorities, including ANVISA in Brazil.
- Accepted test reports - TÜV SÜD test reports can be used in support of INMETRO certification performed by INMETRO accredited organisations.
- INMETRO certification - TÜV SÜD is an INMETRO accredited certification body and can certify your medical device based on INMETRO standards and perform the annual factory inspection required for INMETRO certification.
- Medical Device Single Audit Program (MDSAP) - TÜV SÜD is authorised to perform audits within the scope of the MDSAP pilot program. Gain access to multiple markets by participating at the MDSAP that satisfies the needs of multiple regulatory authorities, including ANVISA in Brazil.
Your benefits at a glance
- Market access - Gain access to the Brazilian market by successfully achieving INMETRO certification.
- Recognised medical device expertise - TÜV SÜD Product Service is the largest European Notified Body in the world. With a Regulatory Foreign Affairs and Clinical Centre of Excellence, TÜV SÜD Product Service is recognised by regulatory authorities for its extensive experience with all types of medical devices.
- Quality system certification and auditing expertise - Medical device approvals routinely require the implementation of a quality management system. TÜV SÜD conducts quality management system certifications, audits and factory inspections consistent with most international regulations and standards, allowing TÜV SÜD clients to enjoy the benefits of coordinated inspections and audits, while reducing downtime and costs.
- Single source solution - TÜV SÜD Product Service offers testing services for major medical device markets according to international standards and regulations.
- Regional and local proficiency - Our regional medical health experts speak your local language and understand regional and local regulations and knowledge needs.